equipment_inventory
This is an old revision of the document!
Tools
Note: This is pretty out of date. Please update me!
Soldering Equipment
- Metcal PS200 x 1 (who knows)
- Metcal PS2E-01 x 4 Solder Stations. Don't use metal iron holders that aren't metcal units.
- Metcal MX-500P x 20. To attach a wand unscrew the connector part, then pull out. Don't use metal iron holders that aren't metcal ( we have more of these now)
- Metcal DS1 Desoldering gun x 2 (one on loan) Manual Set to no more than 80PSI and make sure the filters are installed.
- Hakko 808 desoldering gun. Product Page
- MadellTech Quik853 PCB preheater x 2 Product Page
- Zephyrtronics ZT3 vacuum pencil (1) Product Page
- Zephyrtronics board cradle (1) Product Page
- Zephyrtronics ZT5100 solder paste dispenser (1) Product Page
- Edsyn 1036DX hot air soldering station (1)Product Page
- Edsyn 951SX temp controlled soldering station Product Page
- T-862++ BGA Rework Station Digital Infrared System IR Product Page</code>
Test Equipment
- Protek B940 True RMS multimeter Product Page
- Tektronix TDS 2024B 200Mhz four channel digital storage scope Manual(1)
- Tenma dual channel crt scope
- Velleman hand held scope
- HP 100Mhz State, 500Mhz timing logic analyser 16550A Manual
- Innotronix Logic Analyser(1)
- Bus Pirate x 2 Product Page
- Sump Logic Analyser, Dangerous Prototypes version
- BK 4Mhz Sweep Function Generator Product Page
- Tenma counter
- HP 3478A Multimeter - Calibrated 11/20/2010
- HP 4274A Multi-Freq LCR Meter</code>
Programming tools
- AVR STK600 Product Page(1)
- Pickit II Product Page
- Tincan tools ARM JTAG Flyswatter Product Page
- Olimex ARM JTAG
- Dataman Eprom programmer Product Page(1)
- AVR Dragon x2
- TI CC's
- Segger ARM uLink
- Kraken AVR programmer</code>
Other
- 90W WKLaser Laser Cutter (600x900mm cutting area) Laser
- Scotch Laminator and pouches
- AccurateCNC 560H Product Page [http://www.accuratecnc.com/PhCNC_download_files/PhCNC%20User%27s%20Manual%20EN.pdf|PhCNC Manual] Bits
- Which bits(1)
- Parks microscope
- Amscope microscope x 12
- Silentaire supersilent 20A compressor (1) Manual
- Parrot AR Drone http://ardrone.parrot.com/parrot-ar-drone/usa/
- Benq W1000 1920×1080 Native projector
- HP 4050n
- Brother Inkjet MFC-440
- Graphtec CE3000-60 MK2 Vinyl Cutter/Plotter
- LPKF PCB Mill
- ZCorp 3d Printer Z310 Plus http://www.zcorp.com/en/Products/3D-Printers/ZPrinter-310-Plus/spage.aspx
Development boards
- BeagleBoard XM</code>
We have lots of other dev boards, they seem to breed like flys.
equipment_inventory.1548539169.txt.gz · Last modified: 2019/01/26 13:46 by blakangel