equipment:laser_cutter:upgrades
Wish List
Installed and Upgraded!
| upgraded | |
| new estop switch installed | |
| main power key switch installed | |
| Ruida Controller/control panel installed | |
| Lightburn software installed | |
| red dot pointer w/bracket installed | |
| z autofocus sensor w/bracket installed | |
| Mahoney CO2 Laser Power Meter Probe | (to measure how much power is actually coming out of our tube) |
| 1 pair 10600nm protective glasses | $36 each pair |
| ameter power usage meter | |
| Acquired but not yet installed |
| RECI W2 Laser Tube | new tube is at the space - will install when the old tube fails |
equipment/laser_cutter/upgrades.txt · Last modified: 2023/08/22 10:27 by nz0
