ham_radio_data_network
This is an old revision of the document!
Ham Radio Networking
Using AREDN firmware on off the shelf wifi hardware, you can join an off-the-grid IP network using Amateur Radio frequencies. This is generally on the 2.4, 3.8 and 5.2GHz bands.
Any types of applications and services can run on this network, subject to FCC Part 97 Rules.
Getting Started
tl;dr - Find a node near your location that you have line of sight to, get some equipment and a pole to mount it on, flash it and configure.
Links
AREDN site - Firmware downloads/development, supported HW, forums Map of Socal Nodes - Find a node near you
ham_radio_data_network.1574153711.txt.gz · Last modified: 2019/11/19 00:55 by blakangel