Null Space Labs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Ham Radio Networking =====

Using AREDN firmware on off the shelf wifi hardware, you can join an off-the-grid IP network using Amateur Radio frequencies. This is generally on the 2.4, 3.8 and 5.2GHz bands.

Any types of applications and services can run on this network, subject to FCC Part 97 Rules.

==== Getting Started ====

tl;dr - Find a node near your location that you have line of sight to, get some equipment and a pole to mount it on, flash it and configure.

=== Links ===

  * [[https://www.arednmesh.org/|AREDN site]] - Firmware downloads/development, supported HW, forums
  * [[https://mapping.kg6wxc.net/meshmap|Map of Socal Nodes]] - Find a node near you
  * [[https://www.arednmesh.org/content/supported-platform-matrix|Supported hardware]]


==== NSL Equipment ====
  * [[https://mikrotik.com/product/RB952Ui-5ac2nD|MikroTik hAP ac lite]] Dual-concurrent Access Point 
    * This will be for internal Wifi / VLAN access to the SoCal Mesh
  * [[https://mikrotik.com/product/RBLHG-5nD|Mikrotik LHG 5]] with a pole for mounting
    * 5GHz parabolic grid antenna and radio, to be pointed at the Verdugo Peak backbone nodes from our roof.