User Tools

Site Tools


3dprinter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

3dprinter [2013/06/25 15:47] (current)
Line 1: Line 1:
 +====== Manuals ======
  
 +http://​www.bibus.hu/​fileadmin/​editors/​countries/​bihun/​product_data/​zcorp/​documents/​zcorp_series_zprinter_310_plus_manual_en.pdf
 +
 +====== Powder ======
 +
 +http://​www.faqs.org/​patents/​app/​20080281019#​b
 +
 +
 +Plaster
 +PVA
 +Maltodextrin
 +Terra Alba (a small amount)
 +
 +The  Terra Alba is important for fast drying. ​ But adding too much will cause it
 +to dry too fast and crack.
 +
 +Alabaster plaster with 20 to 80 micron (call manufacturer) needs a mix of small and large particles.
 +
 +===== Binder =====
 +
 +
 +
 +Percentage (amount needed for 1 gallon)
 +
 +  *  Distilled Water: 93.45% volume (3537 ml)
 +  *  Surfynol 465: 0.5% volume (18.92 ml)
 +  *  Glycerol: 6% volume (227.12 ml)
 +  *  Potassium Sulfate: 0.2% weight (7.5 mg)
 +  *  Proxel GXL: 0.05% volume (1.89 ml)
 +
 +**Glycerol:​**
 +http://​www.coleparmer.com/​catalog/​product_view.asp?​sku=8816552&​pfx=WU
 +
 +**Surfynol 465:**
 +http://​www.airproducts.com/​sitecore/​media%20library/​downloads/​s/​surfynol-465/​chem-samples/​Surfynol%20465%20-%20Chem%20Sample.aspx
 +
 +**Potassium Sulfate:**
 +http://​www.coleparmer.com/​catalog/​product_view.asp?​sku=8822253
 +
 +**Proxel GXL:**
 +http://​www.archchemicals.com/​Fed/​BIO/​Docs/​Splash/​Proxel-GXL.pdf
 +
 +
 +**Tools**
 +
 +
 +**Surface Tensionometer:​**
 +http://​www.coleparmer.com/​catalog/​product_view.asp?​sku=5978090
 +
 +**Viscosity meter:**
 +http://​www.coleparmer.com/​catalog/​product_view.asp?​sku=0870100
 +
 +Surface tension: 45 dynes/cm
 +
 +Viscosity: 1.35 cps
 +
 +
 +** Homebrew Links **
 +http://​reprap.org/​wiki/​Powder_Printer_Recipes
3dprinter.txt ยท Last modified: 2013/06/25 15:47 (external edit)