Null Space Labs

User Tools

Site Tools

Trace:
nsl_annoytron
no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


—nsl_annoytron [2013/08/13 12:13] (current) – created - external edit 127.0.0.1
Line 1: Line 1:
 +=====  Programing Notes  =====
 +
 +AVRdude programming header setup
 +
 +AVRISP\tTarget\tATtiny
 +
 +connector\tpins\tpin #
 +
 +<code>
 + 1 (MISO)\tTPIDATA\t1
 + 2 (VTref)\tVcc\t5
 + 3 (SCK)\t        TPICLK\t3
 + 4 (MOSI)\t\t
 + 5 (RESET)\t/RESET\t6
 + 6 (GND)\t         GND\t2</code>
 +
 +Problem: My ATtiny4/5/9/10 reads out fine, but any attempt to program it (through TPI) fails. Instead, the memory retains the old contents.
 +<code>
 + Solution: Mind the limited programming supply voltage range of these devices.
 + In-circuit programming through TPI is only guaranteed by the datasheet at Vcc = 5 V.</code>
 +
 +STK 600 also supports TPI
  
nsl_annoytron.txt · Last modified: by 127.0.0.1