Null Space Labs

User Tools

Site Tools

Trace:
l12014_proxmark3_oled_build

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
l12014_proxmark3_oled_build [2014/07/22 01:10] – [Notes] added 3v3 pic mmcal12014_proxmark3_oled_build [2014/07/27 14:10] – [LayerOne 2014 Badge Build] mmca
Line 1: Line 1:
 ====== LayerOne 2014 Badge Build ====== ====== LayerOne 2014 Badge Build ======
 {{ :2014-06-26_22.26.30.jpg?direct&500 |}} {{ :2014-06-26_22.26.30.jpg?direct&500 |}}
 +
 +Please use pic above for orientation (click for larger image).\\ 
  
  
Line 19: Line 21:
 C9 should be a 0 ohm resistor (jumper).\\ C9 should be a 0 ohm resistor (jumper).\\
  
-R43 should be changed to 110K~120K, ask M for that part.\\+R26 should be changed to 110K there is a reel in the box.\\
  
 Jumper JP2 like so: {{:2014-07-17_15.43.50.jpg?link&200|}}\\ Jumper JP2 like so: {{:2014-07-17_15.43.50.jpg?link&200|}}\\
l12014_proxmark3_oled_build.txt · Last modified: 2014/08/27 20:57 by blakangel