nsl_router
no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
| — | nsl_router [2013/08/13 12:13] (current) – created - external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | So far it looks like it's going to be a moving gantry design made of 3/8 and 1/2 Al plate. 12mm guide rods and rolled ball screws (vs the more expensive ground screws) Nema23 in the X and Y and nema17 for the Z. | ||
| + | |||
| + | We are going to keep substituting cheaper and cheaper parts till it cant hold 30 microns repeatability (about a mill). And than we will go back one step, and do a bulk order in parts. So far in single units the ball screws, which are probably the most expensive bits are 2 buck an inch and 80 bucks for the nut. Linear guide rod is about a buck an inch and the recirculating bearings are about $6~7. | ||
| + | |||
| + | How the current CAD file looks: | ||
| + | |||
| + | {{: | ||
| + | |||
| + | {{:router proto.png}} | ||
| + | |||
| + | [[Image: | ||
nsl_router.txt · Last modified: 2013/08/13 12:13 by 127.0.0.1