====== Manuals ======

http://www.bibus.hu/fileadmin/editors/countries/bihun/product_data/zcorp/documents/zcorp_series_zprinter_310_plus_manual_en.pdf

====== Powder ======

http://www.faqs.org/patents/app/20080281019#b


Plaster
PVA
Maltodextrin
Terra Alba (a small amount)

The  Terra Alba is important for fast drying.  But adding too much will cause it
to dry too fast and crack.

Alabaster plaster with 20 to 80 micron (call manufacturer) needs a mix of small and large particles.

===== Binder =====



Percentage (amount needed for 1 gallon)

  *  Distilled Water: 93.45% volume (3537 ml)
  *  Surfynol 465: 0.5% volume (18.92 ml)
  *  Glycerol: 6% volume (227.12 ml)
  *  Potassium Sulfate: 0.2% weight (7.5 mg)
  *  Proxel GXL: 0.05% volume (1.89 ml)

**Glycerol:**
http://www.coleparmer.com/catalog/product_view.asp?sku=8816552&pfx=WU

**Surfynol 465:**
http://www.airproducts.com/sitecore/media%20library/downloads/s/surfynol-465/chem-samples/Surfynol%20465%20-%20Chem%20Sample.aspx

**Potassium Sulfate:**
http://www.coleparmer.com/catalog/product_view.asp?sku=8822253

**Proxel GXL:**
http://www.archchemicals.com/Fed/BIO/Docs/Splash/Proxel-GXL.pdf


**Tools**


**Surface Tensionometer:**
http://www.coleparmer.com/catalog/product_view.asp?sku=5978090

**Viscosity meter:**
http://www.coleparmer.com/catalog/product_view.asp?sku=0870100

Surface tension: 45 dynes/cm

Viscosity: 1.35 cps


** Homebrew Links **
http://reprap.org/wiki/Powder_Printer_Recipes