Null Space Labs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Wish List =====

==== Installed and Upgraded! ====
^ upgraded|
|new estop switch installed          |
|main power key switch installed     |
|Ruida Controller/control panel installed    |
|Lightburn software installed                 |
|red dot pointer w/bracket installed        |
|z autofocus sensor w/bracket installed      |
|Mahoney CO2 Laser Power Meter Probe | (to measure how much power is actually coming out of our tube)|
|1 pair 10600nm protective glasses          | $36 each pair|
|ameter power usage meter            | 

^ Acquired but not yet installed ^|
|RECI W2 Laser Tube                  | new tube is at the space - will install when the old tube fails|


^ upgrades/nice to haves ^Cost|
|USB camera for lightburn            | $80 https://lightburnsoftware.com/products/lightburn-camera?variant=13886769889325|  
|quiet duct fan                      | $120|
|Rotary tool (y axis replacement)    | $310  (So we can etch round things like glasses and tubes)|
|laser on timer                      | ?|